Reviews for the spare parts. Spare parts for foreign cars Febest: quality, country of manufacture

Unfortunately, any mechanism in the caris subject to wear and tear, and no one is immune from this. Therefore, in the event of a breakdown, motorists look for spare parts of good quality at an affordable price. In this article, Febest will be considered and feedback on the parts produced by it.

The company began its existence in 1999. Initially, it produced spare parts only for Germany. However, after a short period of time, the company began exporting its products to many parts of the world. Russia was among the customers of goods from Febest.

The company is popular among motorists. However, not everyone is satisfied with the quality of products. In feedback on the spare parts of the Febest, buyers leave a different opinion about the purchased product. This is due to many factors.

Febest: Country of origin - Germany

Motorists are used to the fact that in Germany they always produce cars and spare parts for them only of better quality.

In most cases, it is. If you look closer to the company Mercedes or Volkswagen, it can be understood that all cars of this brand are made qualitatively, they serve for a long time without breakdowns. These manufacturers produce all parts with maximum accuracy. Companies value their reputation and popularity, because of this they produce everything on conscience.

Country manufacturer Febest - Germany, why is it the samethen the quality of the produced products is not always similar to the German one. The thing is that sometimes spare parts are produced not in Germany, but in China to reduce production costs. Such products can not be called original, it is counterfeit.

Packaging

Often spare parts for cars from the Febest peopleorder through various online stores. In this case, of course, they can not inspect the quality of the product, its packaging. They hope that if the part is made in Germany, then it is of excellent quality. However, they are upset when the parcel arrives. Most often the packaging looks sad: thin cardboard, and all information about the product is not printed, but simply printed on a separate sheet and glued.

The buyer in this case thinks that hischeated and sent, instead of the original spare parts for foreign cars, a fake. It is even more frustrating, since the quality of Chinese spare parts leaves much to be desired. But in the case of Febest, not everything is so bad. Chinese products are sometimes of acceptable quality, and also serve in the device of the car for a long period of time. But this does not always happen.

Why is in demand?

Some motorists buy parts of the Febest, andothers do not understand why. The thing is that the company produces mainly parts that are most stressed during the operation of the car. Also, Febest is engaged in the manufacture of those elements that are manufactured by other enterprises, but not separately sold, but only in collection with any element. In this case, it is not expedient for the motorist to change the whole mechanism, if one can do with the replacement of only one of its elements. Of course, the original will be of better quality and will withstand a heavy load, but not every car owner is ready for such wastage.

It is for this reason that the company is so popular. Most often, breakdowns occur unexpectedly, and then the motorist is simply not ready for embezzlement on expensive parts. In order to somehow save your money and dig it up on the original, a person puts spare parts from the Febest, most often as a temporary option. At the moment the company has reached a new level and already produces spare parts for almost any car.

There is no other choice

Also, parts of the Febest are installed in othersituations. For example, the car owner drove his vehicle from one settlement to another. On the road, the sail fell into disrepair. The car can not be operated with such a malfunction. Eliminate the breakdown can only install a new semiaxis from the original manufacturer, but with the cost of parts and work to eliminate it is not at all cheap. In addition, the evacuator will have to be called, because of which there will also be additional financial difficulties. Ideal option is the replacement of the defective element on the sail from Febest. In the original, such a spare part is not sold separately.

If automakers understand what to makeand selling parts is more profitable than the assembly, then the demand for the Febest will significantly decrease. Now this company enjoys great popularity because of the fact that motorists have no choice. Some of them take spare parts from this firm and replace it with the original at the first opportunity. But there are also those who exploit the car with the spare parts of the Febest until the moment when they do not come into disrepair. Most often, the products from this company are purchased by second-hand car owners.

Spare parts for chassis

To claim that the auto parts from the Febest badquality, it would be wrong. The thing is that quality is simply not always good. For example, one shroud from Febest will work without breakages of about 10 thousand kilometers, and another will become unusable after 1000 km of run. To foresee this is pretty hard, but if spare parts for the running gear, then you need at least try to do it.

The products of the Febest for the "walker" are different. Stands stabilizers of good quality, but they often come into disrepair anther. Silentblocks are also often of poor quality, but some motorists have had such that they were operated in a normal state for a long period of time. For the running gear, it is recommended to put the spare parts of the Febest only in case there is no alternative. If it is, it is better not to save and put more quality elements.

Bearings

Febest also manufactures spare parts in whosethe device enters the bearing. Such an element is the timing rollers. In general, their quality is not bad, some people have been using their car for quite some time. However, it was also when the rollers came into disrepair and created a characteristic noise almost immediately after installation. Again a lottery.

If the timing roller becomes useless, you canTo purchase for replacement the original, which cost is very high. You can also buy an analogue from the Febest, whose quality is average. In all cases, the video from Febest was used for a different period of time. In some, he worked in a normal regime of about 20 thousand kilometers, while others hummed after the first thousand kilometers. As a temporary option or for sample installation of rollers from the Febest will do. However, if you replace all the timing elements, then do not put parts of this company, because their resource is much less than others. When the original belt is installed, and the rollers from Febest, then after a certain period of time you will need to replace the rollers, but the belt will still be in normal condition.

Hub

The hub is such an element that alwaysis in a stressed state and operates in harsh conditions. Some people have conducted experiments where they exploited various stub bearings from the Febest. In the course of such experiments it was found out that practically each specimen could not work more than 10 thousand km of run without breakage. There was less. Also there were copies, where the resource sufficed for 50 thousand kilometers, but it happened very rarely.

After the experiments all specimens weredismantled. It immediately became clear that the balls were very cracked, and some even burst. Also, the bearing housing suffered a great deal. From this it can be understood that the hub from this manufacturer should not be purchased. It is better to overpay for the original than to take a substandard analog. In addition, if the copy will often fail, then its replacement will be more expensive than buying the original.

What can be considered for the acquisition?

The best quality is the sip from Febest. Its resource is not as big as the original product, but for its value - this is a good indicator. On average, the sails cost about 1 thousand rubles.

The resource of this product is different. In some, the shroud runs about 50 thousand km, while others fail almost immediately after installation.

Reviews of spare parts Febest

Motorists who purchased productsFebest, often leave their opinion about it in the reviews. Febest rods and rollers can still be installed in their cars, as their price and quality match. Wheel bearings and silent blocks are not worth using, because very often they become unusable immediately after installation.

To buy or not?

Most often, the installation of spare parts from thismanufacturers are resorting to people engaged in buying and selling cars. They can repair the sold car for a little money, which will be operated even 1000 km without breakage.

Decide on the purchase of these partseveryone should do it themselves. Do not think that the quality is very bad, because often negative feedback on the spare parts of the Febest is not talking about their quality, but about the wrong installation and breakdown because of this. Also it is worth considering that when a person is happy with the purchase, he does not hurry to go to write positive reviews about spare parts, but simply enjoys buying and that's it. What can not be said about the situation when the detail failed, broke. In this case, as practice shows, people write reviews more often.

Conclusion

The manufacturer of Febest is definitely not Germany. However, this information is indicated almost everywhere. German parts simply can not be so cheap. For its cost, the quality of products is acceptable. The Febest parts can be used as a temporary option. It is best to install sirens and timing rollers from this company, they have a great resource. Installation of hubs and silent blocks from the Febest is better not to produce, as they fail quickly, almost immediately after installation.

Reviews about the company vary greatly, there isfans of these details, and there are those who call them frank Chinese. Buy more expensive parts or choose firm Febest, everyone should decide for himself. We hope that the article was useful for you.