How to tighten the steering rack? detailed instructions

The steering rack is one of the main componentsparts of the steering system. This spare part connects the driving wheels with the steering wheel and the axle, so its failure is equivalent to the absence of an engine under the hood. Such a car can not even be driven away to the SRT (unless on the tow truck), so that something like this does not happen to you during an important business trip, you should regularly adjust the steering rack. The need for this work occurs when, when you hit a bump, you get a strong kick in the steering wheel, and a strange sound is heard near the front axle (dull thuds). In today's article, we'll look at how to tighten the steering rack with your own hands.

Adjustment instruction for vehicles without power steering

To begin with, we need to drive the car onobservation pit. This is done in order to prepare the machine to eliminate the play in the steering rack. Sometimes manufacturers complete their cars with special crankcase protection. In this case, before tightening the steering rack, take the key and remove this part from the fasteners. Then it is necessary to find the adjustment nut. On all modern cars and jeeps, it is located on the steering rack itself. However, it is very difficult to find it, because in a few thousand kilometers it is completely covered by a multi-centimeter layer of mud.

Once you have found this bolt, you needcarefully clean it with a dry cloth, then apply WD-40 aerosol. Next, we take a special 8-sided key on 17 millimeters and pull up the steering rack. Do this with a special care clockwise, so that the nut is not screwed in idly. Before pulling up the steering rack of the 2110th VAZ, it must be remembered that with abrupt movements the bolt can fall off, and then the part will not be exactly in order. If you feel that the screw has scrolled more than necessary, loosen it with the movement of the key.

How to tighten the steering rack to vehicles with power steering?

In fact, the whole process is similarabove stages. However, there are some nuances here. In order to tighten the steering rack, "Lanos" and all other cars with power steering should be placed in a special position. To do this, we set the driving wheels straight and remove the plastic guard with the tip to get close to the adjusting bolt. Then the operation is done with the help of two people. Call a friend or neighbor on the garage and put him behind the wheel. While he twists it, you adjust the screw to the normal value. Before pulling up the steering rack, you need to remember that the angle of rotation of the steering wheel should not exceed a mark of 30 degrees. You can rotate it in any direction. Next, we take the 12-key key and fix the position of the nut at the moment when the mechanism stopped producing characteristic knocking. Everything, at this stage, the adjustment of the steering rack can be considered complete.

As you can see, the work is not very complicated and laborious. Therefore, even the beginner can handle the adjustment of the steering rack.