Brake pads for bicycles: maintenance, replacement, determination of wear

The bicycle began to dial quicklypopularity among ordinary citizens. But before going out for every walk you need to conduct a small technical inspection. It is worthwhile to constantly monitor that all the necessary nodes are in perfect order. The outcome of the walk depends on this: it will be pleasant or not. Well, which system guarantees safety when driving? Of course, the brakes. Today we will talk about how systems are, how to replace brake pads for a bicycle and many other nuances.

What are the brakes

Technology does not stand still. Therefore, brake systems for bicycles are constantly being improved. For a normal cyclist, you need to know that the brakes are of two types: disc and rim. These are two diametrically different brakes. Because of them, the cyclists were divided into two camps. Some believe that there is nothing better than the good old and proven rims, and others believe that this is an outdated technology, so the disc brakes are much more modern and efficient than their predecessors. It should be noted that each of them is right. They have one thing in common, without which neither one nor the second will go far. These are brake pads for a bicycle. They perform the main function - create a frictional force, which stops the vehicle. And anyway, the disk system or rim, brake pads for a bicycle require equal attention. This means that you also need to take care of this element. In case of complete wear, they should be replaced immediately, since then the bike will simply stop braking. Therefore it is very important to monitor the condition of your bicycle.

Brake shoes for bicycle: disc brakes

This type of brake is also called rotary. This is because a special disk (rotor) is used for braking, and not a rim. It rotates with the wheel. The main role is played by a caliper, which clamps its rotor with its shoe. This is the essence of disc brakes.

Brake brakes

Here the device is a little easier. The role of the caliper is carried out by two levers that clamp the brake pads, thereby stopping the wheel.

How to determine the wear of bicycle pads

The fact is that before replacing the brake padsfor a bicycle it is best to check for wear and tear. Suddenly they are still suitable for such a service. In general, good manufacturers on their product make special incisions, which help determine the wear and tear of the system. When the pads are erased to such an extent that it will not be possible to see the slots themselves, it is a signal that it's time to change them already. But before you replace the worn out element, you need to ask the question: "What affects their lifespan?".

First of all on longevity affectsnumber of kilometers and riding style. All is clear, the more you drive, the stronger the pads are torn off. Compare a person who likes simple and leisurely walks around his city, or a bicyclist who can not live without a headlong descent from the mountain and active driving through forest paths. Therefore, much also depends on the style of riding.

In fact, these tips for prolonging lifeBrake rubber is needed only for those who seriously engage in bicycles, or very enthusiastic people. The fact is that good brake pads live on average fifteen thousand kilometers, and some even more than thirty thousand kilometers. It seemed to ordinary people that there was some mistake, but no. In fact, for fans this is just a couple of bike seasons. But ordinary people who just like to go out on nature to go out on the weekend, also need replacing these sites, but not because they drive so much. As a rule, beginners make some mistakes that lead to rapid wear of the brake surface. And can you do so to change the pads as little as possible? The answer is you can.

How to extend the life of brake pads

As a rule, we brake with one brake. Some people advise sometimes to change pads from the front wheel to the rear and vice versa. So they are erased more or less evenly.

You also need to check that the system is configuredideally (this applies to any type of brakes). It happens that the setting flies, and some kind of shoe clamps the rim all the time. So this should immediately pay attention. Not only is this greatly hampering the movement, since such a ride simply "eats" the pads. This may be the case with the disk system. The problem is solved in a simple way - qualitative adjustment of all brakes.

Replacement of brake pads on a bicycle

If it comes to this, then it's worth thinking aboutacquisition of quality goods. How do I change the brake pads for a bicycle? Disk in this regard is better. There generally occurs a replacement in a couple of actions. No need to disassemble the brake. Just pull out the old pads and insert new ones. Then it's worth adjusting them a bit, because the settings may get lost.

Brake shoes are also quite easychange. To do this, unscrew the hexagon socket and replace it with a new one. Only after installation, it is necessary to adjust the brakes and make sure that everything is set smoothly.