How to choose a typewriter for manicure and pedicure? Machine for hardware manicure and pedicure

Well-groomed and aesthetically pleasing nails of hands and feetis a pledge not only of beauty, but also of the woman's health. The modern beauty industry offers a variety of methods, techniques and apparatus for caring for all parts of the body. Make a professional manicure or pedicure in the cabin and at home helps machine for manicure and pedicure. Manufacturers in each of their devices try to take into account all the characteristics necessary for high-quality performance.

But the consumers are still very keen on the question of how to choose a machine for manicure and pedicure, what criteria should be given special attention, and what can be reconciled.

What does the unit consist of?

Before you run to the store for a typewriter, you needfirst find out what will be in the box. The machine for hardware manicure and pedicure consists of two main blocks: the processor and the handle, to which the cutters are directly fixed.

The main processor is responsible for the speed of rotation of the nozzle, sets the direction of motion. An additional built-in motor is in the handle, which twists the nozzles.

Advantages of hands and feet care devices

The appearance of a technique of this kind in the beauty industryallows you to improve your body with even greater comfort and quality. If we talk about the use of such equipment in the walls of beauty salons, the milling machine for manicure and pedicure allows:

• Reduce the physical load in the first place for the master himself, which will save energy, serve a greater number of customers.
• Save time, because for the same procedure, done by hand and the device, takes a different amount of time.
• Increase the quality of service, raise the prestige of the salon, attract new visitors, and, therefore, increase profits.

The machine for manicure and pedicure, reviews about whichtoday so interested in many women, will be a real godsend for women who want to avoid edging manicure, for fear of infection, but who love to look at their ideal marigolds.

What should be the machine: the choice of power

Before choosing a typewriter for manicure and pedicure for the home, you should find out how the power of the device affects its operation. What could be wrong choice?

Even for home use it is better to payattention to devices with a power starting with a figure of 35 watts. A low-power device can initially show good results, but later failures will occur more often, delivering a lot of inconvenience and leaving a sense of money thrown to the wind. Moreover, many low-power devices do not have an adjustment function, which does not make the process more comfortable and better.

Power is of great importance when working withfalse nails. Removal of the nail should be done quickly, so that the natural plate does not have time to heat up. Painless and comfortable it can be done only with a device with good power.

Ergonomics - the next criterion when choosing

The qualitative work of the master directly depends onHow convenient is the device, or rather the handle-milling cutter. The smaller it has diameter, the more convenient it is to handle it. The handle should lie comfortably, the fingers should not feel any tension. This will avoid the flowing of the hand. Important and the mass of the device itself, which should be distributed evenly, so that the machine does not outweigh in any direction. The optimal weight will be at least 150 and not more than 200 grams. The weight of such a handle-milling cutter will allow to carry out both fine work related to the processing of cuticles, and more voluminous species. Convenient handle allows you to control the intensity of pressure on the feet, and therefore, to prevent skin trauma.

Here it is worth mentioning about the cord, which should be long and flexible enough, providing the machine with greater maneuverability.

Nozzles: quantity, quality, materials

Nozzles for all necessaryprocedures are equipped far from each machine for hardware manicure and pedicure. How to choose the necessary and additional attachments? Which of them will be just needed, and with the purchase of which you can wait a little? In the variety of mills the newcomer is easily lost. After all, they have a different diameter, granularity, can be made of different materials. In order for this to happen, it is necessary to understand the purpose of each.

• Ceramic nozzles represent the mostSafe appearance, since the material is relatively soft. They are great for first experiments with manicure and pedicure. A coarse-grained view of the nozzle can be used to remove the keratinous areas of the skin on the feet. Medium grained are suitable for processing cuticles. Fine-grained nozzles are used mainly for grinding nail plates or finishing work with the skin.
• Diamond type nozzles are more rigid in comparison withceramic material. But he also has more functionality. The large diameter of the nozzle allows processing the free edge of the nail, giving it the desired shape and removing coarsened areas. Nozzles with small diameter and burs serve for processing of cuticles and lateral ridges. The price category for diamond baits is different and depends on the technology of production.
• Carbide cutters are used in the initialthe stages of creating a manicure and pedicure, when there is a need to remove a large layer of keratinized skin from the heels, an extra layer of acrylic or drill a hard corn.
• Polishers are necessary for the final polishing of the skinStop. They are made from a mixture, which includes silicone and fine abrasive. They can be treated with gel and acrylic surfaces, if there are medium-soft polishers available. White nozzle is the final polishing of the nail plate. Natural polishers made of wool, cotton or felt will be useful for creating a deep gloss.

For example, the machine for manicure and pedicure NailSpa, reviews about which are mostly positive, in a set has 11 baits, capable of transforming any hardened heels. Compact and stylish unit will provide not only a full-time care, but also a couple of minutes for complete relaxation, as in the kit it has a built-in bath.

Before choosing a machine for manicure andpedicure, the method of fastening the milling cutters should be clarified. There are devices where it is necessary to use an additional key to replace the cutter, which is very inconvenient in the conditions of salon saving time. When choosing an aggregate for home use, this criterion will not be decisive, since it has no effect on the parameters of the work, but it can save some money.

Reliability of apparatus

This is one of the important criteria when buyingapparatus. The machine for the hardware manicure and pedicure in the cabin must necessarily be reliable. Not all models are able to withstand constant work for a long time, meaning not days or even weeks. In order for the device to justify the hopes and means invested in it, it is necessary to choose machines from manufacturers whose product quality has already been verified in practice. This is the kind of machine for manicure and pedicure Nail Spa, which is a whole system for creating excellent quality manicure and pedicure. The built-in spa bath not only provides cosmetic care, but also makes the skin of the hands and feet well-groomed and beautiful.

Optimal size

Before choosing a machine for manicure andpedicure, you should pay attention to its size. Neither at home nor in the salon will there be room for a huge, full-table aggregate. In the salon on the table beside the master, in addition to the typewriter, usually there is still a great many items necessary for the procedure. Well, a very small main unit can become an obstacle to proper cooling of the unit, which will result in its rapid overheating and shutdown.

A few additional criteria

The machine for manicure and pedicure can beis equipped with some additional functions. For example, there are models that are additionally equipped with a vacuum cleaner, which sucks the exfoliated skin in a special container built inside the main unit. This allows you to keep the workplace clean and tidy all the time.

Some of the more expensive units may have the ability to adjust the speed and reverse, carried out and handed down on a separate unit. You can turn it on and off using the pedal.

A real find for home use will be a model with a built-in lacquer drying. For this function, many girls are ready and pay extra.

Mastering Technology

As it turned out, choose a machine for manicure andpedicure is easy if you know what to look for first. Having already at least some idea of ​​what and how it looks, you can safely go to the store for a quality and convenient assistant.

The next important step will be familiarizationThe instruction is attached to the device. It will be sure to describe at what speed it is necessary to process this or that area with this device, which nozzles should be used for polishing nails, heels, callouses.

It will be very useful before working withdevice at home to get acquainted with the video, where professionals in their master classes will show how the procedure is being carried out, where to start, because the hardware manicure has many differences from, for example, classic edging. The more theoretical information is assimilated, the more useful the machine will be, and the more quickly the expectations will be justified.

The rules of work with a typewriter for manicure and pedicure

Well knows how to choose a machine for manicure andpedicure, a professional master of manicure because of his vast work experience. Machines are simply irreplaceable for people with puffing, ribbed, damaged, sick nails, with dry skin.

Manicure and pedicure, performed with a machine,- this is maximum comfort and gentle care for feet and hands. Special cutters, polishers and burs are designed to get rid of keratinized skin, calluses and corns with high quality, quickly and without pain. Safety guarantees a radically different approach to the procedure, in which the dead cells are not cut off, as in a traditional manicure or pedicure, but simply polished. This is what makes it possible to handle even the most delicate areas of the feet between the fingers. The absence of the need to steam the skin, as the whole process is carried out on dry skin, makes the hardware manicure accessible to people with diabetes.

It is fair to say that somepeople still avoid the hardware manicure due to fear of damage or bloodletting, which, by the way, can occur with any other kind of manicure, if the master is caught with insufficient experience. What can go wrong with a hardware manicure? The very first mistake that masters make is the insufficient rotational speed of the milling cutter. A small speed does not flake, but tears the fabric, while a higher one leaves a smooth trace, making the procedure more qualitative.

Another reason why a customer canget any damage, is due to the incorrect position of the hands, head and body of the master in relation to the client. It is necessary to work and locate the device so that there are no "blind" zones. The place of treatment should not be covered either by the hands of the master or by the machine. At the hand holding the handle-milling machine, there must be an anti-support.

When performing a hardware manicure or pedicurethe client should not experience any pain in any case. They can arise in the event that the master, treating the legs, removes the "extra", that is, there is a deeper than necessary, polishing the tissues. The sensation of pain can occur immediately, and may manifest itself in the days following the procedure. Remove keratinized areas should be moderate, constantly controlling the thickness of the skin.

Pain can be from a skin burn or nail. More often it happens when working with a large milling cutter. This is due to the fact that the large diameter nozzle has a higher rotation speed, and if you stay in one place a little longer, you can get a burn. The pain, of course, will be sudden, the client will tense up and remain alert throughout the rest of the process, and the master's task is to achieve the maximum relaxation of the person in the chair. To avoid burns, the master must constantly move the nozzle over the surface of the foot, not staying in one place for a long time.

Another factor that causes inconvenience,can become too strong pressure cutter on an already painful patch. But strong pressure is just a consequence of the small speed of rotation of the nozzle. With insufficient speed, the cutter sometimes does little or nothing, and at the expense of pressing the wizard tries to eliminate this problem, but in fact, you just need to increase the speed of rotation.

Care of the device

Proper care of the device will provide him with a longer service life. Any machine for hardware manicure and pedicure (expert reviews confirm this) requires:

• disinfecting attachments in a special tool before starting work;
• flushing the nozzles under running water or by cleaning in a sterilizer after completion of all procedures;
• a neat attitude to the nozzles and to the process of changing them, especially if this should be done with a special key, which must be used in order not to damage the fastening;
• removing particles of skin and nails from the handle-milling cutter.

From the foregoing, it can be concluded thatbefore choosing a machine for manicure and pedicure and buying it, you should determine the purpose for which the device is purchased, for how long a period, in what conditions the work is planned, and with the amount you are willing to spend on the unit. And certainly not standing in the field of beauty industry will provide you with a wide range of machines that meet your requirements.