/ / Ideas for home: how to hide wires

Ideas for home: how to hide wires

Quite often owners of their own homesthink about the question of how to hide wires from different equipment. If they "flaunt" outside, then the aesthetics of the interior will not add. To cope with such works you will be able to do it yourself, for this you will only need to prepare some tools and show imagination. Manipulation will not take long.

Decoration of wires from the TV

how to hide wires

In some apartments and houses quite oftenyou can see a picture when from the technician by the type of TV go whole strings of cables and wires. However, they can be hidden in the wall, given some rules. Among them, it should be noted:

  • electric wires must not have insulation faults;
  • it is better to place the wires as far as possible from microwaves, refrigerators, washing machines and irons;
  • It is important to avoid moisture and condensation on the cables.

If before you, too, was the question of howhide the wires, it is best to place them in the cable channel, where pass low-voltage lines by type of Internet, alarm and telephone wire. The distribution of the television cable around the apartment must be done in one piece. Intersections are unacceptable, and during installation work, splitters and signal splitters of factory production should be used. Wire twisting should not be, since they will not be able to create good screening, which will negatively affect the signal quality.

A modern solution: the use of a box

How to hide the wires from the TV on the wall

Before you hide the wires, you mustconsider several solutions to this issue, among which the use of decorative boxes should be highlighted. They can be made of metal, plastic or combined materials. This device not only looks pretty simple, but it also meets the fire regulations.

There are also disadvantages to this solution, they consist in the high cost of products, the need for skills of the master, as well as the lack of recommendations for installation.

If you still do not know how to hidewires, then do not buy the first box or cable-channel that suits you in appearance and cost. It is important to pay attention to the accessories, namely:

  • plugs;
  • transitions for angles;
  • tees;
  • peak elements.

This will not only simplify the installation, but will also give the appearance of the box an attractive appearance.

Cabling in the wall

floor cable duct

Quite often novice home mastersare wondering how to hide the wires from the TV on the wall. If you pave them in the stroba, it will become the most invisible and reliable way. Gypsum boards are sometimes used as an alternative solution, but their installation requires time and skills. It is best to use the method of shtrobleniya, but you can only resort to it if the cable laying is accompanied by repair.

Use of plasterboard sheets for decorating wires

how to hide wires from a computer

Before you hide the wires from the TVwall, you can consider several options for solving this issue. As one of them are gypsum boards. For work it will be necessary to prepare:

  • knife;
  • wire;
  • insulating tape;
  • strong rope or string;
  • nut of small diameter.

The order of work

In the first stage, the mounting bracketTV must be secured to the wall. Angles of the location of the household appliance are marked with an insulating tape. In the process of work this will exclude the possibility that you will go beyond the zone that is hidden behind the TV.

how beautiful to hide wires

Next, mark the locationsockets for connecting a TV. All available cables are lowered, and on the plasterboard markings are made for the holes. The installation area of ​​the socket should be marked as accurately as possible, this will allow it to fit into the hole without any gaps.

Before you hide the wires beautifully, on the wallyou must make the cable channels through which the cables will be routed. In the lower part of the wall a second hole is made, through which the cable hides in the plinth. The outlet can be installed behind the TV, but it should be easily accessible.

How to hide wires in a cable channel on the floor

how to hide the wires under the table

The floor cable channel is also great fordecoration of wires. To do this, you can use a variety of fasteners, as the most common advocates samorez. Once the wires have been laid inside, you can proceed to fix the cable duct.

The distance between the screws will depend on theload on the plastic box. When working with plasterboard or a wooden wall, where the cable channel will be fixed, the screws are installed every 50 cm. With uneven walls, the fixing step is reduced, which makes it possible to hide gaps and defects. The cable must not be fixed with a long self-tapping screw. For reliable fixing, 40 mm fasteners will suffice. For screwing it is recommended to use a screwdriver with a cross bit.

Decoration of wires in a cable channel by means of dowels-nails

how to decoratively hide wires

If the cable channel is to be reinforced to the brickor a concrete wall, which is quite common for modern houses and apartments, in this case can not do without a cable channel and dowel-nails, which are also called fast erection. To perform the work you will need a perforator with a 6 mm drill.

For self-fixing the box forcable on the wall of brick and concrete, you need to perform a number of the following actions. 6 mm holes are drilled in the bottom of the cable channel, the distance between them is 50 cm. The box is attached to the wall by marking, which will mark the points of attachment that coincide with the holes in the cable channel. The holes must be drilled, only after the box can be installed in its place. Using a hammer, the nails are clogged.

Using "bugs" to install a cable channel

If you need to install a cable duct inmetal surface, the thickness of which is 2 mm or less, to fix, you should use self-tapping screws for metal, which are also called bedbugs. On sale, you can find a special gun, through which the cable channel is installed on concrete.

Original ideas for home: how to make wires from the computer invisible

You too can try to decide the question,how to hide the wires from the computer. There are several modern solutions for this. The first idea is to disguise the cords under the table top. To do this, clips are used, mounted on self-tapping screws or reinforced with double-sided tape.

If you do not want to spoil the table, thenYou can hide the wires in a conventional box from under the shoes, but you can decorate it beforehand by making a design that is close to the interior of the room. If you are wondering how to decoratively hide the wires, then for this purpose you can buy a special decorative cover, which hides the extension cord. It can be attached to the cover of the desk.

When the cord from the speakers interferes, it is usually hidden insuch a cover that is fixed to the back of the table. Excess cords and charging can be removed using ordinary paper clamps for paper. Another original idea is to conduct the wires through the hose. This often helps to solve the problem of how to hide wires under the table in one shell, which will not spoil the interior so much.

Conclusion

Workplace using one of the aboveways can be made more accurate and aesthetic. In this there is nothing complicated, the cords can simply be placed in a box or fastened under a table. An additional advantage is that the cords will be reliably protected from children, as well as pets.

Read more: