How to take readings of water meters: features and variations of the procedure

In order that you always have water in your house,it is necessary to pay for it in time. Naturally, for this you need to know how much liquid you have spent and how much is one used cube. Although many people do not specifically install such a device. If you have it, then you need to know how to take readings of water meters.

It should be noted that modern devicescan have either 8 or 9 numbers on the scoreboard. Several figures are placed on a red background, they denote liters of liquid, and the rest - on black (this is cubic meters). Before taking water readings, take a look at the last 3 dark numbers.

You can perform the procedure in several ways. For example, you can take metrics every month, comparing the previous and the last digits and subtracting their difference. The number of units you used multiplied by the cost of one cubic meter. And the indicators can either be independently assigned to the branch of the water channel, or sent via the Internet (telephone). Although, until now, there is a practice of filling out subscriber books, which are periodically checked by the specialists of the ERRC.

Before taking water meter readings,choose the most convenient way for you. In any case, the procedure provides only visual imprinting of the data. It should be noted that the independent transmission of testimony can be carried out with certain errors or errors. The fact is that sometimes the owners of apartments try to understate the amount of water used to pay less.

Since to take readings of water metersspecialists practically can not (the device is inside the house), try to mark cubic meters correctly and as precisely as possible. In addition to the presented method, there are other methods of conducting the procedure. For example, remote transmission of indicators. However, this requires a modern counter, which is capable of sending such a signal. The presented device with sensors has a rather high cost, and not even in all localities such technology is introduced.

You can also automatically take the readingwater meters. To do this, you need to install a device with a pulse output. Although you can buy the device, which will be all prepared for this option, but the main elements of the technology is still missing. If necessary, they can be easily installed. Indicators in this case are removed in a certain period of time (every month, six months) and sent to the dispatcher. However, in such systems, failures occur very often, which can be caused by a banal short circuit.

You can also send device data bydefined radio channel of low power. For this, too, you need a special device. The presented new methods of water consumption control are still not widely used, therefore it is not worthwhile to install such devices on their own - it will be more expensive.

Now you know how to take the water meter readings. I wish you success!