Roll of ruberoid - size. Price, technical characteristics
Roll ruberoid, the size of which can bedifferent, can be purchased today in any construction shop. This material is used for roofing works, it perfectly waterproofs. The composition of the material contains roofing cardboard, as well as bitumen, which is used in two varieties. If you intend to use this material, you should first consider its positive and negative characteristics.
The dimensions and weight of the roofing paper roll
Roll of ruberoid, the size of which can bebe equal to 1000, 1025, 1050 mm, has a weight varying from 26 to 30 kg. This parameter can vary depending on the brand. In the production process, standards are used that do not allow a deviation in width greater than 5 mm. Builders are also interested in how many meters are contained in a roll of this waterproofing material before purchasing the described material. Thus, if the material is coarse-grained, then the length of the web in one roll is 10 m, while the dust coating is limited in length of the roll to 15 m.
Before buying a roll of roofing material, its sizeyou must study. This indicator sometimes depends on the brand of material. So, if the marking is denoted by the abbreviation РПП-300, and also РПЭ-300, then the length of the cloth is 20 m. Such a roofing material is the thinnest coating. The thickness of the canvas is also important. If you need roofing material for work, then you need to take one that has a thickness of 3-5 mm, whereas in the case of litter material this figure is 2.5 mm or more.
Features of composition
Cardboard is the basis of absolutely all kinds of ruberoid, but it can differ in density. If we are talking about roofing waterproofing, then it is much higher and is approximately 350-400 g / m2. To ensure better adhesion to refractory bitumen, cardboard is processed with a low-melting bitumen. This, among other things, increases the moisture resistance of this layer.
It should also be noted that the top layermaterial has a coating in the form of a meltable bitumen, which is mixed during the manufacturing process with plasticizing mineral additives. The finishing layer for different grades of material can be made of talcum, which is a dust-like powder. As an alternative, large-fraction sand is sometimes used, which is a coarse-grained powder.
Roll of ruberoid, the size of which is indicated above andis important for the master, has a lower cover layer, which contains the same melting bitumen that has additives. The sprinkling of the bottom layer of any brand consists of talc and mica, this composition prevents the coil layers from sticking together during storage.
Marks of roofing material
If you are interested in the question of how many metersin a roll of ruberoid, then you need to consider different brands and features of each of them. So, depending on the powder used during the production, a material with coarse-grained and scaly powder is produced from the conveyor. The weight of one roll of ruberoid with coarse-grained sprinkling is approximately 30 kg, while the length is limited to 10 m. This kind of insulation is laid on a cold or hot type of mastic. Sprinkle can also be scaly. If it is a one-sided roll, the weight will be 20-28 kg, and the length will be 20 m.
With regard to two-sided material, its weightin the roll will be equal to 26-32 kg. The length will remain the same. If you decide to use a one-sided roll, then its installation can be done only on hot mastic, while the double-sided must be laid over cold and hot mastic.
Quite often,how many meters in a roll of roofing felt, which has a fine coating. The length remains 20 m, while the weight varies from 20 to 26 kg. The material is applied to hot or cold mastic.
Characteristics of roofing material
The properties of the roofing felt can differ, thisdetermines the type of material. For example, if we are talking about a roofing felt, which is produced under the marking RKP-350, then it will be based on cardboard, processed for 1 m2 350 g of bitumen. It can be used only for waterproofing, as talc is used as the top layer. It can also be used in the role of the lower layer in the arrangement of the roof. Its coating weight is 800 g / m.
Characteristics of roofing felt РПП-300
This brand is often considered identical to the previous one. This material is used for the mentioned purposes, but this kind of roofing material has not so impressive characteristics. The breaking force is 22, and not 26 kgf. However, the weight of such a roll will be smaller, sometimes it is important for the arrangement of the roof. At 1 m2 such material will have an impact in 500 g.
Characteristics of roofing felt of grade РПП-200
Ruberoid, GOST is designated by figures10923-93, can be produced and labeled RPP-200. It is used in the arrangement of the roof, as well as in the basement. It is based on cardboard, which is covered with talc in both sides, as well as with petroleum bitumen. Due to the application texture, this type of ruber has excellent flexibility when compared with other similar materials.
Characteristics of RM-350
The width of the roofing material you already know, now you canpay attention to the fact that there is a brand RM-350. This material does not hold heat as well as others. The water absorption coefficient is 40 g / m. But the cover layer is 1600 g.
The ruberoid is not hazardous to health, butIt is worth checking the certificates of compliance. The service life will depend on the modification and correctness of the installation. Thus, this period can be 12-30 years.
Cost of roofing felt
If you decide to choose roofingworks ruberoid, the price of a roll you should be interesting. It will vary depending on the brand and manufacturer. The average price of ruberoid RKK-350 will be approximately 290 rubles per roll. If you purchase the material of the brand RPP, then it will cost you 300 rubles per roll. But the roofing paper RKK-400 will cost 400 rubles per roll.
