Putty for wood for outdoor use: marks, characteristics, consumption
Putty for wood for outdoor use canbe purchased in the store or made by yourself. Some believe that the homemade mixture can not be better than the factory mix. If you also have a similar opinion, you should familiarize yourself with some varieties of these mixtures to make the right choice.
Characteristics of putty "Rainbow 0023"
This composition is made in different colorgamma and is intended for sealing joints, cracks, as well as irregularities in wooden floors, which are subjected to intensive loading during operation.
The composition has a high elasticity, which hasgreat value for flooring. It has no odor and does not emit toxic substances, is fire-safe and characterized by low shrinkage. Among other things, you can count on high adhesion. All these qualities make the putty "Rainbow 0023" widely used.
Scope of use
Application can be carried out on homogeneousstructures and sawn timber according to the type of chipboard, MDF, fiberboard and chipboard. If the putty for wood for outdoor work is applied to the surface, then at room temperature in the range of +19 to +21 ° it will dry for 4 hours. Due to a slight shrinkage, the flow rate is approximately 1.5 kg / m2.
Features EP-0010
This facade putty for exterior work onGOST 28379-89 is realized together with a hardener. However, before buying, you should be careful, since the epoxy resin with filler has among the ingredients only those materials that are sold under the marking EP-0010 or EP-0020. Among other things, the hardener for these formulations will be different.
This putty is used in many areas. It can be applied to lumber, metal, plastic and ceramics. However, as practice shows, the surface of the floor is better not to process it, for this purpose acrylic putty on wood will do. As for the composition of EP-0010, it is better to use it to remove defects on windows and doors. You can apply the mixture and when repairing boats, as well as yachts. If, for example, the doors are made of sawn timber, the epoxy putty will be an excellent basis for further staining and will give the product water repellent characteristics. You can use this compound for large areas.
Characteristics of the putty mark "Bolars"
This putty for wood for outdoor useThey are mainly used for finishing facades, on which it is able to withstand without cracking for almost 10 years. If necessary, the composition can be used even for the restoration of walls inside the bathrooms and rooms. In this case, the dried surface can be covered with wallpaper, paint, decorative plaster or tiles. The product is non-shrinking and resistant to damage. At 1 m2 it will take about 1.4 kg, which is true with a layer thickness of 1 mm. The operating temperature is within a fairly wide range, which is limited to a range from -40 to + 60 °.
This putty for wood for outdoor usecan be applied by a layer, the thickness of which varies from 1 to 10 mm. Cement is used as a binder. Surface grinding is possible after 24 hours. To prepare a solution it is necessary in such quantity, which you will have time to work out for 3 hours, such is the period of a life of a mix after connection with water. Since the product is manufactured in Russia, its price is acceptable to any consumer. For a 25 kilogram bag, you will have to pay 400 rubles.
Description of acrylic putty "Choice wizard"
This acrylic putty for wood for outdoor useworks are also actively used by consumers. This is especially true of the composition that is made in Russia under the brand name "Choice of a Master". The mixture can be applied to concrete, brick, plaster and other mineral surfaces. Putty is used for leveling of external and internal walls, as well as ceilings inside the premises. The mixture is made on the basis of an aqueous dispersion of acrylic copolymer. After application, it will be possible to obtain a smooth and smooth surface, which can be subjected to staining. The putty is easy to apply and grind after drying.
The mass is fully ready for use, which simplifies the work process. This shpaklevka for wood for painting has many advantages, among which:
- excellent adhesion;
- elasticity;
- security;
- ecological compatibility of the material;
- ease of application;
- slight shrinkage;
- reasonable cost.
By the way, for packing in 3 kg it is necessary to pay only 180 rubles.
Description of the putty mark Tikkurila "Lakkakiti"
Putty on wood "Tikkurila Lakkakiti"It is a universal compound that can be used for interior and exterior work. As the basis is a stone, concrete or wood. 5 m2 will take about 1 liter of this composition. The mixture perfectly aligns the surface. The composition is easily applied and ground, and afterwards can be stained with all kinds of materials.
This alkyd filler filler canbe applied on wood, wood-fiber and wood-chip surfaces. After drying, alkyd, latex, catalytic or oil paints can be applied to the substrate. The composition is well suited for wet or dry grinding, as well as for looping. As a diluent, you can use white spirit, and the application is carried out by spraying or spatula.
This putty on wood, the price of whichis 850 rubles for a can of 0.33 liters, it must dry at a temperature of + 23 °. At the same time, the relative humidity should be 50%. This will take several hours, depending on the thickness of the layer, the relative humidity of the air and the ambient temperature. The minimum setting time is 30 minutes. Many experts are interested in such characteristics as the density, as well as the dry residue. They are equivalent to 1.8 kg / l and 0.018%, respectively. The mixture well withstands transport and storage at low temperatures.
Features of applying putty for wood
Facade putty for outdoor work with anythe composition should be applied to a properly prepared base, which provides for cleaning it from dirt, grease stains and dust. It is not to be hoped that the formed layer will be able to block other components that are not made of wood. It will not be able even epoxy putty, despite the fact that it has a wide range of uses. This is due to the fact that water, grease and debris will reject the applied layer and will not allow it to enter into a molecular interaction with the lumber.
In order to remove the remains of the old paint,use a mechanical method. This includes metal scrapers, industrial hair dryer, as well as a grinding machine. As an alternative solution, you can use a metal brush, which is worn on a drill or bulgarian.
Conclusion
When the putty for wood for painting is appliedon a wooden surface, it is best to use thick compounds. In any case, the application should be done with a rubber spatula, but you can also use a metal tool, which, however, is less convenient.
