A simple gazebo: in one day you can make it real by yourself!
Accomplishment of the adjacent territory concludes inimagine not only the creation of an interesting landscape of the site, but also a convenient place of rest for both solitude and for a large company. It is for staying in nature that you need a zone of comfort and communication. In this case, a built gazebo for one day with their own hands will present a pleasant pastime with the family and close people.
Preparation before construction
Before you start building,It is necessary to determine the place of erection of the object. It is also important to observe the architectural style of the country cottage and make the construction following the example of the design of local buildings. Next, decide on the appearance of the building. The created arbor in one day with your own hands can be open, half-open or closed type. Depending on the purpose of use, the construction can be built next to the entrance to the house or in the depths of the garden.
The species itself, which opens fromsummerhouses. For example, on a flower bed, a pond, a field or a dense forest. Consider the approach to construction. Built a gazebo in one day with their own hands must have leading to it paths, as well as bushes or fences, protecting from the windy side. An important point before starting work is laying the foundation. For small structures it is erected by columnar, pile, tape, rarely monolithic. Before the construction of the frame, determine what it will be made of: metal, wooden beams, brick or reinforcement. Determined with the place and type of gazebo, it's time to take up the plan.
How to draw a project?
Drawings of arbors begin with preliminaryMeasurements of the territory on which construction is planned. It is necessary to outline the location of the entrance to the building, the location of the table, the stove or barbecue, rest areas. The size of the arbor depends on the number of visitors. Next, consider the appearance of the building. The arbor in a day can be rectangular, round, 6 or 8 coal, and also combined forms.
Very popular are woodenbuilt with metal lining. Pay attention to the drawings of the pavilions given in this article. If space allows on the land, the project can be slightly adjusted, following its needs. In a small area it will be appropriate to have a gazebo for a rest of 1.5 x 2 m, accommodating no more than 6 people. Construction with dimensions of 2.5x3 m can have a brazier, a working area and even a table for 10 people. For large companies, it is reasonable to erect closed-type, multi-faceted constructions.
Inexpensive gazebos made with their own hands
After you have drawn a design plan,It is necessary to transfer the drawing to the prepared site. Work begins by driving the peg at the corners and pulling on the rope. Thus, the marking for the foundation is applied. Next, we check the geometry and equal diagonals. The next stage will be to clear the area from the top layer of the soil and prepare the pits along the perimeter of the building at an equal distance, starting with the angles of the marking. The distance between the depressions should not exceed 2 m.
Next, prepare a pillow under the foundation of rubbleand sandstone. Punch her well. Set the concrete bricks across the entire area at equal distances from each other. In order to isolate, polish the pillars with bitumen. Then lay several layers of roofing material on the posts. On the perimeter we lay the bars measuring 10x10 cm in diameter. To fix the middle woods in the ends, we make notches and fasten them together with metal corners.
On the foundation we lay the woodenlags, previously impregnated with antiseptic. Then at the corners should be installed wooden racks, reinforced with metal corners. We tighten the poles on the upper perimeter and check the geometry. Then we floor the floor from the grooved board.
Roof and walls
At the top of the strapping, fasten the verticalbeams connected by a horizontal beam. Next, we join the rafters, supporting the construction of 30 cm. It will be most convenient to make the base of the roof on the ground. Arbor with his own hands made of metal is made similarly with the replacement of parts for reinforcement and metal. Next, proceed to the fastening of the handrail, observing the height of not more than a meter. The walls can be decorated with both wooden and metal grill. We cover the arbor with paint and build a porch. Now you can do interior trimming.
