Fluorescent lamp T8 and LED lamps T8: characteristics, dimensions, connection. Lamps for aquarium T8

Lamps series T8 are produced by LED andluminescent type. The threshold voltage for them is on average 20 watts. The size of the model is quite different. Use the device can in the house, as well as office space. Also there are modifications for aquariums.

Dimensions of lamps

If we consider fluorescent lamps of the T8 series,they are available in sizes from 13 to 30 cm. In this case, the models have HH marks. LED lamps are produced in three sizes. The PP mark indicates a length of 15 cm. Lamps with the inscription RK have a size of 20 cm. Also on the market there are modifications of 25 cm. They have the designation PO.

Features of luminescent models

Fluorescent lamps are manufactured withcores. The average power of models is 23 V. Drivers are most often used with capacitors. The luminous flux of luminescent modifications does not exceed 230 lm. Also, the models differ in terms of pressure, light output, and maximum frequency.

Luminescent type lamps are used, such asrule, in office premises. The luminous efficiency of the models is no more than 150 lm. The parameter of power consumption fluctuates around 180 W. Modern models are manufactured with an overheating protection system. The minimum permissible temperature of the lamps is -10 degrees. The maximum frequency does not exceed 120 kHz. For living quarters the device is not suitable.

Features of LED lamps

LED lamps T8 are also used in residentialpremises. Starters for models are used with fuses. In this case, the power of the models does not exceed 15 V. It is also important to note that triggers are set to turn on the lamp. In many modifications, the light output parameter fluctuates around 150 lm. The average consumption of electricity is 190 watts.

Connecting Lamps

LED lamps of the T8 series are connected viaadapters. They are issued for two or three contacts. If we consider office models, then they have starters. Connection of T8 fluorescent lamps is standard through a double adapter.

Specifications of the Philips G13

Characteristics of T8 lamps are pleasing to many, andDevices with a wire starter are manufactured. The maximum modification frequency does not exceed 90 kHz. If you believe the experts, the base of the model is of high quality. The current of the LED lamp is 9 A. The minimum operating frequency is 14 kHz. The inductor is impulse type. For living quarters the device fits well. Luminous feedback from the model is low. It is also important to note that the current consumption is 190 watts.

Description of devices Philips G14

These T8 LED bulbs are installed infixtures. The power of the presented model is 20 W. If you believe the experts, the starter of the model is of high quality. The fuse is missing in this case. The operating frequency itself is a maximum of 90 kHz. The shell is provided for the closed type.

The service life of the LED lamptype is 12 thousand hours. For office premises, the model is not suitable. The parameter of limiting brightness is 6 microns. The luminous flux of the modification does not exceed 250 lm. The minimum permissible temperature of this T8 lamp is -20 degrees.

Lamps series Osram 765 for aquarium

The specified lamps T8 (sizes РК and РО) are issuedwith a protected inductor. Speaking about the parameters, it is important to note that the minimum frequency is 13 kHz. The current of the lamp for the T8 aquarium does not exceed 9 A. The maximum permissible temperature is 40 degrees. The power of the device is 23 Watts. The starter in this case is installed with a fuse. The service life of this model is 16 thousand hours. The ignition time is on average 3 seconds. The minimum permissible temperature of the T8 lamp is -10 degrees.

Characteristics of models for the Osram 800 aquarium

These lamps for the T8 aquarium usegreat demand. First of all, it is important to note the high parameter of electricity consumption. The power of this model is 23 V. The directly operating frequency is a maximum of 99 kHz. The plinth in this case is of a two-layer type.

The starter of the model is provided with a pass-throughinducer. The luminous flux of the LED-type lamp does not exceed 240 lm. The limiting pressure of the modification is 80 Pa. The discharge in the presented model is slow. The average on-time is two seconds. The minimum permissible temperature of this T8 lamp is -10 degrees.

Description of devices Electrum 20

This T8 lamp is quite goodcharacteristics. The maximum device frequency is 160 kHz. The inductor is of the impulse type. Thus, the device turns on quickly enough. For office premises, the model fits perfectly.

The minimum permissible temperature of the lampseries T8 is -15 degrees. The trigger in the device is used with a fuse. The minimum frequency of the model is at 12 kHz. The maximum flux is 320 lm. The electric power consumption parameter is 190 W. The maximum pressure for the model is 210 Pa.

Lamps series Electrum 22

The specified lamp T8 is issued under fixtures. In this case, the power of the modification is 30 W. If you believe the experts, the starter burns out of the model not often. The minimum permissible temperature of the T8 lamp is -15 degrees. In this case, the shell is of a three-layer type. Trigger in the model is provided with one fuse. Speaking about the indicators, it is important to note that the maximum frequency is 160 kHz, and the current does not exceed 8 A. The cap in the device is standardly tubular. The light flux of this lamp series T8 is equal to 210 lm. The pressure limit model holds at 60 Pa.

Characteristics of Electrum 25 models

This is an inexpensive and high-quality fluorescent lampT8. Customer testimonials indicate that it has a high-quality fuse. In this case, the shell overheats very rarely. The minimum frequency of this modification is 15 kHz. The inductor is of the impulse type. The mains voltage of the model can withstand 220 V. The maximum deviation is 20 V. The average on-time is four seconds. The energy consumption of the lamp does not exceed 190 W. For office space, the device fits perfectly.

Description of devices DELUX 13

This fluorescent lamp T8 is sold with a pass-througha starter. The on-time is only three seconds. In this case, the minimum frequency parameter does not exceed 13 kHz. Inductors in devices are used without adapters. The plinth of the model is provided with a tubular shape. The limiting power of the lamp series T8 is 30 watts.

If you believe the experts' feedback, then the light fluxthe model is quite high. However, it is important to note that the threshold pressure is only maintained at 120 Pa. The protective layer of the model is. The service life of this lamp series T8 does not exceed 9 thousand hours. For office premises the model fits well. The indicator of electric power consumption is 190 W. The luminous efficacy of the lamp is 230 lm. The minimum permissible temperature is -15 degrees. The maximum frequency for this T8 lamp is 120 kHz.

Lamps series DELUX 15

This T8 lamp has many advantages. First of all, experts note the high quality of the socle. In this case it is used with a protective layer. The on time is three seconds. The minimum permissible temperature is -20 degrees. The indicator of electricity consumption is equal to 190 V. The current overload in this case is 5 A. The light flux of the model does not exceed 230 lm. The mains voltage is indicated by the T8 series lamp withstand a maximum of 220 V. The current deflection index does not exceed 20 V.

Description of devices DELUX 20

This T8 lamp is very powerful. In this case, the starter is used with a throttle capacitor. The luminous flux of this model reaches a maximum of 240 lm. If you believe the experts, the inductor has good conductivity. Problems with the inclusion of it do not occur often.

The shell in this case is closedtype. The protective layer in it is used with halophosphates. Many experts say that the model is not afraid of high humidity. The minimum permissible temperature of this T8 lamp is -20 degrees.

Model specifications DELUX 30

These T8 lamps are sold with starterinductive type. Among the features of the models should be noted quality base. The minimum permissible temperature of this T8 lamp is -15 degrees. The tube in this case is made with a ferrite ring. For office space up to 20 square meters. meters model fits well.