How to automatically configure MMS on "Tele2" and whether it is possible to do it manually?

The MMS service is no less popular,than sending text messages. At each person sometimes there can be a necessity to send a picture to other subscriber, for example to share impressions from rest. Modern gadgets, as a rule, automatically configure the Internet and MMS right after the SIM card appears in the device slot. In some cases, when this does not happen, you have to make a request for settings or prescribe them manually at the appropriate point in the phone. How to automatically configure MMS on "Tele2"? When can I need to manually configure the device to receive and send multimedia messages?

Get Settings: General Description

As mentioned earlier, sending settingsIt is initiated automatically by the system as soon as the SIM card is registered on the network. The process of accepting these parameters is performed on the client side (by saving them in the device). In fact, in order to start using the MMS service, you only need to save the settings received from the operator in the form of a text message. However, not all subscribers accept the sent parameters on time. For example, a person purchased a new gadget, inserted a SIM card into it, and immediately received several text messages, among which the MMS parameters. Most likely, such a person will ignore such notifications, since he currently does not have any needs for this service. But in the future, he may have a fair question about how to connect and configure MMS on "Tele2".

Request for MMC parameters

If the client of the alternative cellular operator had to be in a similar situation, then you can exit it in several ways:

• Carry out a request for autotuning through the operator's service;
• perform a similar operation through the web interface of the personal cabinet;
• prescribe the settings in your device.

Attention! You should enter the correct data if youwere puzzled by the question of how to set up MMS on "Tele2". Detailed instructions with recommendations are contained on the official resource of the operator. Below in this article, we also describe how you can configure yourself.

How to automatically configure MMS on "Tele2"

If the option of manual input of connection parameters is not interesting to the subscriber and the question of ordering autotuning for MMC was raised before him, then we recommend using the voice service to receive them.

To receive and apply on your mobile device the parameters necessary for using the MMS service, dial the number 679 (the connection is free, as well asreceiving settings). After applying to this number, the subscriber from whose device the request was made, will receive a text message. After that, the person will just need to click the "Save" button on the smartphone's display.

If you clarify with the contact center operator how to set MMS on "Tele2" automatically, then he will also recommend making settings for the connection through the personal cabinet.

When Manual Tuning may be required

The subscriber's interference and the need for self-tuning can occur in the following cases:

• The settings sent by the operator were not "received" by the device;
• when the SIM card is inserted, settings are not received;
• The received message with settings was deleted.

Sometimes the inability to send multimediaThe message can also be related to the fact that this service is simply disabled on the number. Despite the fact that it is basic and is available on all SIM cards by default, the subscriber himself could previously turn it off. In this case, you first need to puzzle how to connect MMC to "Tele 2". How to manually configure the settings on your gadget, read on. Below, you will learn how to configure the settings in the device's menu.

We prescribe the parameters for the MMS service on devices running on the Android OS

So, if you use a gadget on "Android" and you can not figure out how to automatically configure MMS on "Tele2" failed, it's time to manually set the necessary parameters.

In the device settings, you should find a section for mobile networks. Here you need to add an additional access point. In the parameters requested for it, we enter the data:

• The home page address is mmsc.tele2.ru (a similar value should be written in the "Access Point (APN)" field - mms.tele2.ru).
• The access point type is mms.
• Proxy - 193.12.40.65.
• MCC - 250.
• MNC - 20.

The values ​​for the fields "login" and "password" are not required.

Setting up the service for the iPhone

For owners of apple devices, the procedure for entering parameters is not much different from the one considered earlier.

To add follows MMS-proxy - 193.12.40.65:8080, APN MMSC (similarly, as on "Android" devices).

After the machine has been registeredyou must reboot it - this is done in order for the settings to take effect. Before proceeding with the procedure of entering parameters into the corresponding menu of the device, it is recommended to try autotune (how to automatically configure MMS on "Tele2", we told earlier).

Another recommendation after a successful setupis sending a test multimedia message to any number, you can even on your own. This is necessary in order to register a device with the settings you have entered on the network - this will allow receiving similar messages from other subscribers in the standard form, and not as a link to the MMC gallery.