Practical tips: how to enter the BIOS on the Asus laptop
This material describes how to enter into theBIOS on Asus laptop and its properly configured. Unlike stationary system blocks, mobile computers are not distinguished by a high level of unification. If, in the first case, only the Del key is used universally for the input, there may be various options. It is the most common options for entering the basic settings of the PC and will be set out in this material. Also, practical recommendations on BIOS setup will be given.
What is BIOS?
BIOS is a basic input-output system. It stores the basic settings of the computer (date, time, type of installed processor, size and model of the connected drives). That is, the information without which the PC can not function. In most cases, the default settings are sufficient: the computer boots up and everything is fine. But this approach is not entirely justified. It is necessary to install optimized parameters that allow you to reduce download time and use resources more rationally. Physically, this is a chip with volatile memory, which is installed on the motherboard. Its operation is impossible without a battery. As soon as the battery is discharged, it needs to be replaced on the motherboard. Otherwise, each load will have to set the required values, which is not entirely convenient. Running the BIOS on the Asus laptop or the device of any other manufacturer is performed after the power is applied. After that, the state of the equipment is tested. Before the beginning
Main login options
The easiest way to find out how to enter the BIOS onAsus laptop, in the user's guide that comes with the mobile PC included. There necessarily it is specified. But such documentation is not always available. Then you can try to determine this during the boot process. To do this, after the power is on, we look at the screen. If a manufacturer logo appears, press Esc. On the black screen it is necessary to find an inscription of the following form: Enter to setup ... Instead of the ellipsis, the required key or a combination thereof will be indicated. This inscription will be either at the bottom of the screen, or at the top, at the end of the text. Its location depends on the model of the device. As practice shows, most often this Taiwanese manufacturer uses the following options:
- F2.
- Ctrl + F2.
- Del.
Therefore, if it did not work out how to enterBIOS on Asus notebook is one of the two previously mentioned methods, then you can try to determine it by selection method. That is, when you first start the mobile PC, press the first key of them and look at the result. If it did not work, then we use the combination already at the next boot. Well, finally apply the third option. In most cases, one of the proposed three options must necessarily work.
Sections of the BIOS
Now we will find out what sections the system consists ofBasic I / O on a device like the Asus notebook. Going to the BIOS is not difficult, if you follow the directions that were set out in the previous section of the article. After that a window of blue color will open. At the top of it there will be a menu that consists of the following items:
- Main - basic parameters of the PC (processor type, date, time, number and type of installed memory).
- Advanced - advanced settings (interrupt system and other values, this section can be configured only by an advanced user).
- Power - power consumption and voltage on the main components of the system unit.
- Boot - the system boot order.
- Exit - exit options from BIOS.
To navigate between them, you need to usecursor keys. On entering, press Enter. To make changes, you can use the keys either PgDn and PgUp, or F5 and F6. By the way, all possible actions by the keys are indicated in the tooltip. In the main window, it is located at the bottom, and in the rest - on the right in the column. Its only drawback is that it is in English. Therefore, those who are not familiar with this language, will experience certain difficulties at first time when working in BIOS.
Settings
The easiest BIOS setup on the Asus notebook can be done as follows. After logging in to this system, go to the Exit tab. On it we find the point Load optimized defaults and press "Enter". A prompt appears, which you must answer positively. That is, click OK. After that go to the Save and exit setup and press Enter. Next, the laptop will restart normally. The manipulations made are sufficient to significantly speed up the testing of equipment.
Checking for changes
If you decide to pick up thinner settingssystem, it is best after each parameter change to restart the Asus notebook. Go to the BIOS with the following similar procedure will not be difficult. In this case it will be possible to observe firsthand the effect obtained. Some parameters are critical, and if you do not install them correctly, you can easily and easily determine the cause of the problem. But in the event that several changes were made simultaneously, it is not so easy to solve this issue.
Recommendations
Several parameters of the basic input / output system allow to speed up the initialization process of such a device as the Asus notebook. Log in to BIOS At the same time, as it was noted earlier,do several times. You must immediately set the order of the boot device selection. To do this, go to the Boot menu. In it as First Boot it is necessary to install exactly that hard disk (PgDn and PgUp keys are used or F5 and F6, on the right there is a hint how to perform this manipulation), on which physically the operating system is located. The same parameter is sent before its installation either on a flash drive, or on a CD-ROM (depending on where this procedure will be performed from). The following boot sources (Second Boot, Third Boot) must be Disabled to avoid misunderstandings. Similarly, it is recommended that you install Other Boot. Next, you need to disable the logo output of the mobile PC manufacturer. He may be hiding important messages about the state of the hardware of the computer during the testing phase. To do this, go to the Advanced section and find the item Logo On. It is also changed according to the previously stated method to Disabled. Then save the changes and reboot the laptop. Loading BIOS on the Asus notebook will then be visible firsthand, and not hidden behind the manufacturer's logo.
Disable unnecessary tests
The last important parameter that you needbe sure to change it's Qick Power. It is in the same section, and when it is enabled (Enabled), a number of tests are performed, which are not necessary when the download is complete. Therefore, it must necessarily be disabled, that is, set to Disabled. After its deactivation, the PC download speed should increase significantly. If the default value of each of the previously listed parameters is set to the recommended value, then there is no need to make any changes.
Conclusion
In the framework of this article, it was described not only that,How to enter the BIOS on the Asus laptop, but how to configure it. There is nothing complicated in this operation, and the right parameters allow optimizing the order of PC boot and more rational use of its resources.
