Self-leveling self-leveling floor: stamps, characteristics, reviews

The self-leveling floor isa kind of screed, the main feature of which is the possibility of pouring a layer of different thickness. This technology has alternative names: leveling screed, flooding floor, as well as a self-leveling mixture. When carrying out the work, the finished composition is self-leveling, spreading evenly over the surface. In this case, there are no gaps and gaps, as well as air bubbles and elevations. If you fill the floor, the price per m2 should be interesting to you.

Scope of use

The property of forming an almost perfect surfaceDetermines where such a floor is used. As a rule, this is the finishing leveling screed before laying the flooring by the type of laminate, carpet, ceramic tile, piece parquet and parquet board.

Varieties of self-leveling floors

On sale it is possible to find self-leveling mixtures,which are used to equip the finish coat. This matte and glossy floors, as well as 3D-surfaces that mimic natural materials, stones, and sometimes presented in colorful designs. Work with similar compounds is not so difficult, so you can make a self-leveling self-leveling floor. However, to begin with, it is necessary to decide which brand to choose, and also to become more familiar with the characteristics and reviews.

Features of the floor brand "Starateli"

When you visit the store, you can choose one of thevarieties of fast hardening floor "Starateli". As one of the options can be identified fast-hardening floor, which is used to eliminate significant unevenness. For a 25 kg sack you will have to pay 315 rubles. However, consumers are interested not only in the cost, but also in the quality characteristics that are inherent in the mixture.

Thus, the compressive strength reachesmarks in 15 MPa, it is possible to apply a composition up to 100 millimeters, and it is intended for carrying out only internal works. Only 4 hours after pouring the surface can be used, moving on it. In its thickness you can lay a warm floor.

It is necessary to carry out the work with normalhumidity, as for the period of operation. Lay the composition is recommended for reinforced concrete or concrete, as well as rough cement screed. Use the surface as a thick filler floor, which will replace the rough coat. Put on the base you can use natural stone, piece parquet, linoleum, floor tile, laminate, as well as carpet. The composition is universal in terms of the method of application, the laying technology can be mechanized or manual.

Reviews about fast-paced system "Starateli"

Paul fast-hardening "Starateli" possesseslight gray, its minimum thickness may be five millimeters. According to users, the manufacturer recommended time (40 minutes) will be enough to cope with the work. Carry out manipulations at a temperature of +23 degrees. After 28 days, the screed will reach the compression strength indicated above.

Buyers like that the composition is differentefficiency, its consumption can be equal to the limit of 13.5 to 14.5 kilograms per square meter. This is true with a layer thickness of 10 millimeters. Home craftsmen advise using this composition for floor arrangement, which is supposed to be used in moderately wet or dry rooms. As the base, you can use not only cement, but also anhydrite, as well as gypsum surfaces, the strength of which is 150 kilograms per square centimeter or more. Before starting work, it is recommended that all cracks, seams and joints be closed. A universal primer is applied to the surface, which is dried for an hour. On the perimeter of the room along the walls and near the columns it is necessary to fix the damper tape.

Characteristics of thin filling floor "Starateli"

If you need a bulk floorSelf-leveling, you can choose the composition to create a thin base. It is designed for final alignment and is called a thin floor. For a 25 kg sack you will have to pay 400 rubles. Apply the mixture can be a layer in the range from 1 to 20 millimeters. In 4 hours the surface can be used. The mixture during application differs excellent spreadability.

As a distinctive feature of this sexit is possible to use it for high humidity. The material has minimal shrinkage, and after 28 days it can be 0.1%. If the thickness of the filler floor is equivalent to 10 millimeters, the average flow rate will vary from 14 to 15 kilograms per square meter.

Reviews about the thin floor system from the company "Starateli"

If you decide to use for workthin floor, then you need to save the base of the base from grease stains and other contaminants. When dealing with highly absorbent substrates, their priming is repeated after the first layer of the corresponding mixture is applied. According to users, it is very important to correctly prepare the composition for the formation of a thin floor. To 9 liters of cold clean water you need to add 25 kilograms of dry material, and then mix by hand or with an electric mixer for 5 minutes, until you can get a homogenous current mass. The composition is left for 5 minutes, then mixed again. It is important to avoid an overdose of water.

Self-leveling flooring, reviews about whichIt is important to read before visiting the store, it is easy to apply. This process can be carried out using a pump or manually. If necessary, a needle roller can be used to level the surface. Home craftsmen advise in the period of hardening to exclude direct sunlight and the formation of drafts. To start laying the finish coat is recommended 7 days after the completion of work, the waiting period will depend on the thickness of the layer of the filler floor. If it is a question of ceramic granite, ceramic tile or natural stone, then the installation of these materials can be started only after three days.

Characteristics of the Bergauf flooring floor

Self-leveling flooring Bergauf toois popular with consumers. Visiting the store, you can pick up one of the varieties of self-leveling floors. For example, Boden Inter Gross is a high-speed mixture that can be used for manual or machine application, is characterized by a lack of shrinkage and does not form cracks on the surface. If you do not have the skills to work with the described mixtures, then you should choose Eeasy Boden, which quickly hardens, can easily be laid, and is characterized by resistance to cracking.

It is possible to move along such a surfacealready after 8 hours. For the formation of screed, the thickness of which will vary from 5 to 60 millimeters, it is worth choosing Boden Zement Medium, this composition is used as a basis for flooring with a heat-insulating layer. It is widely distributed, since it can be used 4 hours after laying.

Reviews about the system of self-leveling floors "Knauf Tribon"

As users emphasize, this compositioncan be used to create a screed thickness of 10 to 60 millimeters. This mixture is a universal compound based on a complex mixed binder, as well as special modifying additives and quartz sand. The latter is used as a placeholder. According to the beginning masters, it can be argued that this solution is an excellent solution for people who are just starting to gain experience in repair and construction work. This is due to the fact that the composition has an extended viability time.

Load floor can be in 24 hours, andWalk on it is permissible after 6 hours. The screed does not shrink, but also is resistant to cracking. Self-leveling self-leveling floor "Knauf Tribon" is environmentally friendly, as it contains only safe materials that do not contain substances harmful to human health. This advantage often causes consumers to choose the described system for leveling the floor.

Reviews about the composition of Glims S-Level

Self-leveling self-leveling floor Glims S-Level,reviews about which the most positive, can be purchased by you for 490 rubles. This cost will have to pay for a 20-kilogram bag. Mixtures are produced in Russia, and therefore are common in the domestic market. According to users, the claimed consumption of 1.5 kilograms per square meter at a layer thickness of 1 millimeter is true.

To equip this system, as well asto operate it, it will be possible in conditions of rooms with normal humidity and in a bathroom. The thickness of the layer can vary from 2 to 30 millimeters, and as a finishing coat you can use a parquet board, linoleum, tile or laminate. Home craftsmen emphasize that when the layer is set to 10 millimeters on its surface it will be possible to move as early as 4 hours after pouring. This self-leveling self-leveling floor can be used as a base for linoleum, which is recommended to be laid after 5 days. The same recommendation applies to laminate and parquet boards. But tiles can be mounted in three days.

Cost of work

If you do not want to lay the floor, the price per m2 should interest you. On average, it is 400 rubles, as for thin-layer coating.