Snow-bracelets with their own hands: step-by-step instruction
Often there are situations when forovercoming a certain section of the road lacks the capabilities of the vehicle. It is a question of steep, frozen ice rises, of sites with deep mud, of a snow-covered road. You can get out of such situations by buying or making anti-skid bracelets with your own hands. Even an ordinary tire, which is necessary for driving on asphalt, by means of such device will receive excellent qualities, characteristic for off-road cars.
Advantages of chains
Using such devices, the driver will receiveexcellent cross-country ability in deep snow. Significantly improve the coupling characteristics. Accordingly, the controllability on the frozen areas will increase. In addition, you can successfully overcome the mud areas. Many motorists love to travel on the roads of Russia, off-road. They often upload photos and videos on a variety of resources, with which you will see how effective anti-skid bracelets are. By their own hands, besides, it's not difficult to make them.
Negative features of bracelets
Naturally, the chains also have shortcomings that can limit their use. You should pay attention to them in order to avoid unpleasant situations.
- First of all you need to take into account that the suspensionwith the steering will be subjected to increased loads. Accordingly, along with high cross-country capacity, increased wear will be obtained. The steering rack will be particularly hard hit if chains are installed on the front wheels.
- Another important factor is that tire wear will increase. Accordingly, the period of their service will be greatly reduced.
- The made anti-skid bracelets with their own hands will lead to wear of the gear box.
- The speed of movement will be limited to 50 km / h.
- Do not forget about the acoustics - the chains are able to produce a strong enough noise.
Using soft chains
You can resort to a more gentle option, withwhich will help to increase the throughput of your vehicle. It's about using rubber or plastic chains. The made anti-skid bracelets with their own hands in this situation will have weaker off-road parameters. However, the fatal wear of tires, suspension, transmission can be avoided. In addition, the speed of movement will increase (up to 90 km / h), which is also an important factor.
Wheel bracelets can be conditionallydivided into two categories. They can be soft and hard. Both versions are longitudinal ropes or chains (in the number of two pieces), which are stretched along the circumference of the wheel. Between them, you should pull the transverse chains or grousers made of plastic or rubber.
What are the chains?
The crossbars can be made in the form of a ladder,rhombus or honeycomb. Each of these options has positive and negative points. The scaffold is characterized by improved rowing capabilities. It is better to resort to it in the event that it is required to overcome the mud portion of the road. However, one should know that such anti-skid bracelets lead to the fact that the wheel can "bury". Therefore, riding should take place "vnatyag". The driver may encounter other problems. The car will have poor lateral stability. Tires will start to wear out faster. Transmission with the steering will be subjected to a stronger impact load
Wheel bracelets with a pattern inThe appearance of honeycombs will cause less damage to the main components of the vehicle. Tires will also last longer. Compared to the ladder, such patterns can provide better lateral stability. Constant contact with the surface will also be obtained.
Features of rigid and soft chains of anti-skid
Unequivocally fails to answer which oneschains are preferable. Each has its own advantages in certain conditions. Therefore, there is no universal option. Hard chains are best suited for full off-road. Due to more pronounced rowing abilities, they will allow to overcome a difficult area, encountering fewer difficulties.
If you decide to make soft braceletsanti-skid with their own hands (photos of such structures can be seen in the course of reading the review), it should be understood that with their help storm off-road can not be. But such systems will help to overcome difficult areas. Advantages of this option are that plastic or rubber chains can be removed as soon as a complex area has been passed. Accordingly, further movement will occur at a higher speed, without the risk of damaging tires or powertrain transmissions.
When choosing rigid chains, attention should be paid tosize and cross-section of links. The more they are, the better will be the rowing possibilities. But the wear of tires, gearbox and steering will increase noticeably. The links with a square section also contribute to improving the rowing qualities.
How to make chains with your own hands?
Since the cost of such structures is quiteis high, then you can make anti-skid bracelets with your own hands on the VAZ, "Gazelle", "Niva" or other vehicles. The process is not complicated. All the necessary items can be found in the building stores. It should be understood that self-made structures will cost less, and the quality of them will not be inferior to the purchase options. And the benefits are easy to find.
The easiest way is to make a ladder with your own hands. To do this, measure the two lengths of the chain so that they are slightly smaller in length than the length that is characteristic of the circumference of the wheel. Using S-shaped hooks, cross sections must be fixed between them. They should have an equal length, which will slightly exceed the width of the tire.
Making anti-skid bracelets with your own hands on"Gazelle" or other vehicle, you need to connect with each other longitudinal segments. For this you should use the carbines. In the middle of each longitudinal segment, it is necessary to fix the tensioning device. The other end is attached to the carbine with a hook. This device will help to reliably secure the made anti-skid bracelets with your own hands (on the "Niva", VAZ or other vehicle) on wheels.
Chains with a diamond pattern make it much harder. But even with such a task you can cope if there is a desire and perseverance.
Chain installation on wheels
Installation in no way depends on whichit is planned to put chains on the wheels of the car - self-made or factory ones. You can install bracelets in several ways. The machine should be subdued so that the wheel assumes a suspended state. After that, it is required to put on a bracelet. This method of installation is simple. However, time will have to spend more.
The second variant of fastening
The second method is faster. However, experience and certain skills are needed. It is necessary to lay out chains with bracelets on the ground, carefully straightening them. After that, they will need to drive so that until the end is about 30 cm. Then this long part of the bracelets must be put on the wheel. From the inside, the chain will need to be fastened using a hook. All links must be straightened. External sides will also need to be fastened together. After that, the bracelet is tightened with an adjusting cable. This method is optimal in the event that it is necessary to fix the made anti-skid bracelets with their own hands on trucks.
It is not necessary to fasten bracelets on all wheels
Before rushing to storm off-road,run about 50 meters and pull up the chain again. Due to this, you will extend the durability of tires. It should be noted that wearing all-wheel bracelets is not recommended if the vehicle is not all-wheel drive. If the car is normal, then it's enough to put chains on the driving wheels.
Conclusion
In this review, we examined how to do thisanti-skid bracelets on the vehicle with their own hands. In this there is nothing complicated. Simplicity differs and their installation. Therefore, with a little effort, you can achieve the goals. And impassability will not be frightening anymore. A complex section of the road will be overcome quickly and successfully.
