How to clean the iron from scaling and what should be done to ensure that the scale is as small as possible

For the question of how to clean the iron of scale,as little as possible disturbed you, you need to use it to pour water that has been cleaned of salts. It can be distilled water. By the way, this property is enjoyed by ordinary ice from the refrigerator! So do not throw it away when defrosting the refrigeration unit, but collect the liquid that has been melted for future use. In a caring owner, as we see, everything goes into action!

In my youth, my mother taught me (for a long time it was!), how to clean the iron from scaling and burnt cloth. She was wetting a clean rag with a solution of vinegar, laying it on the corner of the table and rubbing his sole with the hot iron on the very corner of the table. The rag in this place very soon acquired a dark - dirty color, it was moved, and the process was resumed. This continued until the iron did not shine with its pristine purity.

So, maybe to clean the iron from scalingdid not take away our precious time, immediately pour water into it with vinegar dissolved in it? "In no case should not this be done!" - knowledgeable people answer us. After all, in the iron device there are parts made of rubber. Acetic acid, even diluted, can have a detrimental effect on them.

Today's electric appliances for ironingare completed already at the factory with sets that help the owners maintain their electric assistant in perfect condition. These are cleaners for irons liquid, a special pencil for the sole of the iron and a napkin. If there are no such iron in the accessories, then it will not be difficult to get them in special stores today.

Often also in many models there is a functionself-cleaning iron with instructions for its use. For it on the body of the unit provides a special button. And we just have to fill the full tank and put the iron on maximum heat. After the first shutdown, do not immediately start cleaning, and wait for the second shutdown. And then follow the instructions that explain us how to clean the iron from scaling.

Immediately after the iron is turned offagain, you need to very quickly pull the cord out of the outlet and, having grasped the iron, move to the bathroom or the kitchen - where there is a sink or bath. Although you can use the usual basin, but in this case, splashes are possible.

So, holding the hot iron over the bathroom, press onself-cleaning button. Immediately, steam escapes from the holes on the sole of the iron, pushing out all the slag accumulated there from outside its interior. However, it is worth considering the fact that all the water can not evaporate the iron. Therefore, after the steam stops falling, you need to actively chatter the iron, while keeping your finger on the button, until all of the water is drained from it.

And now you can look at the bottom of the bath: oh-ho-ho! That's how much limescale clogged the inside of your patient hard worker - iron! And this despite the fact that you regularly clean it, do not start, taking care of its condition.

But if a bachelor, not much addictedlife, rarely draws attention to the state of irons and all kinds of washing machines, it is quite possible that cleaning will not give a full result. And not all devices have a self-cleaning function. Then you can apply another advice, suggesting how to clean the iron from scaling.

For this we need heat-resistant dishesSuch a size that the sole of the iron freely entered into it. On its bottom should put two wooden sticks. This is to ensure that the soleplate of the iron does not come in contact with the bottom of the dishes, and the cleaning liquid could freely enter its steam openings.

Now you need to install the iron on the sticks and pour indishwashing detergent. It is possible to use a special factory tool from scaling. But there is an alternative solution. It takes its roots from the antiquity, when the irons did not yet have steam holes. And cleaned them with ordinary vinegar or citric acid.

And now we pour boiling water into our structure. You need to pour so much water so that the soleplate of the iron is covered by 1.5 - 2 cm. That is, the holes in the sole are immersed in the liquid, but all the other parts, both rubber and electrical - do not.

After 10 minutes from the scaling on the sole of the ironthere will be a trace! However, this process is particularly effective at high temperatures. And the water in the tank, alas, too quickly cools. Therefore craftsmen - rationalizers advise us to "weld porridge from iron", like a wise soldier. Since you want to clean the iron from the scum using only one portion of the solution, then, in order not to prepare a new product, they recommend that we put this whole structure - a container with liquid and iron inside, standing on wooden "rails" - on a slow fire.

After this procedure, you can "hedge"repeated self-cleaning method. After washing the soleplate of the iron with clean water and wiping it dry, leave it to dry completely. After all, it is quite possible that all these procedures contributed to the wetting of some parts of the device, connected with electricity. And the ingress of water into the electrical circuit causes a short circuit and a burnout of the devices.